N-beta-(aminoethyl)-gamma-aminopropyl-trimethoxysilane.
Synonym: N- [3-(Trimethoxysilyl)Propyl]Ethylenediamine;
N-(2-Aminoethyl)-3-Aminopropyltrimethoxysilane;
N-Аминоэтил-3-аминопропилтриметокси-силан;
N-[3-(트라이메톡시시릴)프로필]에 틸렌다이아민)(AEAPTMS)
Countertype of Dynasylan DAMO, DowCorning Z-6020, ShinEtsu KBM-603, Wacker GENIOSIL GF 91, Silquest A-1120
Chemical Structure
Introduction
SiSiB® PC1200 (equal to A-1120, GF 91, KBM603) is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level.
SiSiB® PC1200 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as “coupling agent” leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture.
Typical Physical Properties
| Product: | N-beta-(Aminoethyl)-gamma-aminopropyl-trimethoxysilane |
|---|---|
| CAS No.: | 1760-24-3 |
| EINECS No.: | 217-164-6 (212-164-2) |
| Empirical Formula: | C8H22N2O3Si |
| Molecular Weight: | 222.4 |
| Boiling Point: | 259°C [760mmHg] |
| Flash Point: | 128°C |
| Viscosity 25°C: | 4.5mm2/s |
| Color and Appearance: | Colorless transparent liquid |
| Density [25°C]: | 1.025 |
| Refractive Index [25°C]: | 1.446 [25°C] |
| Purity: | Min.99.0% by GC |
Solubility: SiSiB® PC1200 is unlimited miscible with water with spontaneous hydrolysis occurring. Caution: Due to solution enthalpies mixing water is exothermic. Always stir PC1200 into water. With alcohols miscibility is, in general, possible with self-catalyzed exchange of the alkoxy-groups. In aliphatic and aromatic hydrocarbons and (moisture-free!) ethers or esters SiSiB® PC1200 is easily soluble at differing levels. With ketones and various halogenated compounds a slow reaction can occur. Towards acids, epoxides or isocyanates PC1200 shows typical amine function. Some nonferrous metals can discolor upon contact.
Applications
SiSiB® PC1200 may be used as an effective coupling agent for clay reinforced elastomers such as natural and nitrile rubber, to improve physical and dynamic properties.
SiSiB® PC1200 may be used as an effective coupling agent for mineral reinforced nylon 6, nylon 6/6 and polybutyleneterephthalate, to increase the flexural and tensile strength of the thermoplastic composite.
SiSiB® PC1200 may be used as a fiberglass finish or a resinous additive for fiberglass reinforced phenolic, melamine and expoxy thermoset composites.
SiSiB® PC1200 may be used as a mineral binders in in foundry and abrasive composite applications, to improve adhesion, increase composite strength.
SiSiB® PC1200 may be used as a glass and metal primer, to improve the adhesion of many coatings (urethanes, epoxies, phenolics and others) to glass and metal surfaces.
SiSiB® PC1200 may be used as an adhesion promoters in polysulfide, polyvinyl chloride plastisol, silicone two part urethane and epoxy adhesives and sealants.
Packings
Net weight 200Kg steel drum or 1000Kg IBC container, for more details, please visit Packing Centre.